Recent: 1999 Renault Megane Fuel Pump Location Guide

Mend > Home Alarm Systems

Mend Scantronic 9450 Alarm Siren Tamper

Scantronic 9450 siren connections?

Hi, could you help me with this queory. Im trying to connect a siren to my scantronic 9450 panel. it is a separate siren (not a bellbox) with just red+ and black- wires to connect.
how do i connect this and close the bell tamper circuit? i am also going to connect a separate strobe in the future again unsure of connections are the BELL and STR(strobe) connections for neg or pos wires?
thanks

gazzer
November 2015
ScantronicScantronic 9450Security Systems, Home Alarm SystemsAlarm Siren Tamper
should be set at sab neg wire trip for bell and strobe if you have put the neg wire from your siren to the bell trip (neg)and the red to the positve feed to the bell module,it must work

gts
November 2015
thanks for the reply.
I have now done this but still have a problem.
the siren works fine when in best test mode, but when I simulate an actually alarm situation it doesn't ?? the panels internal speaker sounds but no siren. does this suggest a faulty panel or am I missing something?
what should the scb/sab selector be set at, could this be an issue?

gazzer
November 2015
marked on the pcb bell

gts
November 2015
you just put a link between the negative and tamper return inside the control panel,the put the red wire to the positive feed to the bell module,and the black lead to the bell trip wire

gts
November 2015

Related Questions ...

Mend security system tamper
1

How to turn of tamper alarm on Logic Six house alarm?

I moved into the house over 2 years ago and have never touched it nor do I have a fob. It's never done anythin... [Read more]
Mend alarm fault fitted
2

Nexus 8 alarm system - constant bell tamper fault?

My neighbour's home was burgled and the Nexus 8 alarm, which I fitted years ago, activated. Burglars smashed t... [Read more]
Mend battery keypad tamper
1

Scantronics 9651 - and 9330 keypad?

Hello, My alarm started to beep intermittently and key pad display saying MISSING BATTERY. I didn't panic ... [Read more]
Mend accenta work alarm
7

Accenta 8 outside siren not working?

We recently had some painting work done to the outside of the house and the contractor (bless him) silenced th... [Read more]
Mend system new home
2

how can i dismantle my accenta/optima system to take to my new home?

hi guys. i am moving home and want to take my alarm system with me. my brother is going to re-install it when ... [Read more]
Mend tamper siren help
1

ade Opimta alarm , how to switch the tamper warning light off and siren?

Hi could any one help, i have a ade optima compact home alarm, i was replacing the guttering and accidenta... [Read more]
Mend alarm system tamper
2

Re wiring?

Hi i have just moved into a house with a eurosec alarm system and it seems that the cequra external sounder ha... [Read more]
Mend switch tamper light fuse
8

How to switch off Tamper light permanently on in Accenta after fuse change?

The lights on the dial of an Accenta 8 Burglar Alarm system went off. Checked and replaced a blown fuse in the... [Read more]
Mend fault currently installed
6

Gardtec 500 Alarm Fault?

I currently have a Gardtec 500 alarm installed which is now at least 10 years old. This morning the alarm star... [Read more]
Mend red light wont
2

Pir red light always on and zone won't set?

Hi I have a pir on the landing with a permanent red light. If I set the alarm it fails on that zone but if ... [Read more]
Mend alarm system keypad siren
2

Accenta 6 Alarm System?

I've just replaced the remote keypad which was about 12 years old. I've also had to replace the fuse for the... [Read more]
Mend accenta 8 mini
1

how can i fix my accenta 8 mini?

just moved into a house which has a accenta 8 mini alarm on every now and then internal alarm goes of showing ... [Read more]
Mend tamper pad alarm
1

Accenta - tamper fault and remote key pad frozen?

alarm has been atcivated. Internal siren and siren to front of the property has stopped however siren at the b... [Read more]
Mend security system keypad
2

Please can any one help with accenta optima alarm code not known!?

We have recenyly purchased a new property which has been fitted with an optima g3 alarm unfortunatlywe are una... [Read more]
Mend system years started
2

How can I fix my Yale wireless alarm system?

I have a Yale 3000 wireless alarm system that has worked well for several years. Recently, I have started o su... [Read more]
Mend security system scantronic

Disable Alarm Scantronic 9800?
Mend house alarm scantronic keypad

How can I send house alarm?
Mend smoke security system

Reset system after smoke alarm sounds & user manual request?
Mend security alarm tamper

Tamper won't go off?
Mend system reset scantronic power

SR system reset on Scantronic 9827 after total power failure?
Mend alarm security system home security

Scantronic 9651 alarm?
Mend phone number company

How can I upgrade my Scantronic 9827 home alarm?
Mend scantronic alarm battery

How can I stop beeping?
Mend alarm security system

How can I reset a Scantronic 9427?
Mend alarm panel home alarm scantronic

House alarm Scantronic 9427?
Mend alarm security system battery

Scantronic 9427 Alarm?
Mend alarm scantronic reading

Alarm?

How to mend ...

Find out how to mend just about anything howtomendit.com for free repair help, information and advice.
Mend Home Alarm Systems ...

Other models...

Scantronic 500rScantronic 808Scantronic 816Scantronic 9000Scantronic 9100Scantronic 9425Scantronic 9427Scantronic 9448+Scantronic 9448ESScantronic 9449Scantronic 9452Scantronic 9454Scantronic 9600Scantronic 9651Scantronic 9751Scantronic 9752Scantronic 9800Scantronic 9800+Scantronic 9827Scantronic I-on 16

Related Categories

Mend Car Alarm Systems
Car Alarm Systems

Topic

Scantronic 9450 Siren & Strobe Connections