I have a Hotpoint Aquarius + WMF740, it is starting to fill and after 2 mins flashing H20 and then doing nothing. Have followed advice given previously but machine does not seem to have this clear pipe at the rear of soap dispenser.
My machine is about 5 years old.
These people seem to know what they're talking about but neither of them mention the way that the machine knows if there's enough water in it. Surely there will be a water pressure switch of some sort to tell the electronics there's enough water and to move on to the next stage.
Might this sensor be defective?
But then again - I know nothing - I just imagine that I'm a washing machine - which is probably not a sensible thing to do.
H20 is the chemical formula for water
April 2015
This is a main module fault. You need to change the main module in the back of the machine. We stock it at £56.28 + £6 postage (exchange). This is ready programmed for your model number. To order, go to our website at www.emwelec.co.uk and put your model number in the search box or call us on 01159652118. You will still have the option of returning the module within 14 days for a refund (less our handling of £12) if it does not sort out the problem. Tony EMW Electronics
Tony
April 2015
Have you checked that both taps (hot & cold) are fully open? Take the hoses off the back of the machine & point them in to a sink or bucket and then slowly turn taps on and confirm that water is coming from the tap. If it is then you may have a faulty inlet valve. You will need to get someone with the proper test meter who can check & replace the valve if it is faulty.
howtomendit.com for free repair help, information and advice.
Try fixfault.com to fix washing machines.