Ry10532 Chainsaw worm gear. Suggest ordering Husqvarna worm gear for their 340-345-350. It's on ebay. It needs to be modified slightly. 1.Shave off the four little tits with a razor blade. 2.Use a drill bit to enlarge the openings for the gear that turns the worm. All other specs are perfect. Did mine, and the oil is flowing
paul kinsley
July 2019
for the RY10532 the oil pump assembly (308541001) has been discontinued. I removed the worm gear found it needs replacing but can't find replacement nylon worm gear. Is there another worm gear that might work here?
Kevin
March 2015
On some of the ryobi saws there is a nylon drive behind the clutch.
remove side casing and clutch to get at it. they only pull out.
remove and check,as these are prone to strip the drive gear.
cg
March 2015
1) Pour oil in
2) Clear out oil hole
That's what I do
March 2015
Automatic Answer
While you wait for answers, we may have found some information which could help you.
howtomendit.com for free repair help, information and advice.
Try fixfault.com to fix chainsaws.