df61 dishwasher slowly filling up when not in use?

The water inlet is on the back with this model,

Easy enough to change but the hardest part was getting off the internal hose, hose clip wouldnt open as much as I would of liked so had to use pliers on clip and twist and pull the hose at the same time.
The hose went back on easier, tried to get the clip in same position on the hose to seal it again.
This is the only thing I am worried about, but as it is on the delivery side of the valve it will not be under constant pressure and shouldnt leak much. I hope.
Anyway its fixed the problem of filling up with water when not in use.seams ok but will keep a close eye on it

a.o.P
March 2014

take the kick panel off the bottom front. should see it where the waterline connects

helpful
January 2014