Recent: Safely remove screen protector from a Macbook Air?

Mend > Dishwashers

Mend Hotpoint BCI450 Heater Element Terminals

How can I fix my Hotpoint dishwasher bci450?

Hi guys, wondered if someone could help..i have recently replaced a heater element on my Hotpoint dishwasher as the terminals were burnt out, replaced element and re/crimped connectors. Lovely jovely, on putting machine back together I started wash cycle up and stopped minutes into cycle beeped numbers 3 & 5 on the led display and will not continue to finish cycle. Anyone got ideas on how to solve this problem I have? As don't want that dreaded argument with the missis!!

Siyiy
December 2013

Automatic Answer

While you wait for answers, we may have found some information which could help you.

Click here for Heater Element Terminals

Related Questions ...

Mend trips power machine
5

Hotpoint aquarius 1100 (WM63) trips main power?

Washing machine trips the main power when switched on but after the water has filled up. I have read some art... [Read more]
Mend main wash machine
1

Flashing main wash light Miele W838 washing machine?

From perusing many forums, I learnt that when the main wash light keeps on flashing this means there is a faul... [Read more]
Mend oven element blown
2

Creda cooker oven fault?

The main oven heater element has once again blown on my Creda Reflection 48196 cooker..I have fitted a new ele... [Read more]
Mend heat cold heater
1

Candy ECO 1001 does not heat water ?

Hi, My Candy ECO 1001 doesn't seem to be heating up its water anymore. It works ok, just everything comes o... [Read more]
Mend fisher paykel nautilus dishwasher
1

Fisher and Paykel nautilus 920 dishwasher displays a F1 AFTER fix?

Fisher and Paykel nautilus 920 dishwasher displays a F1 fault. The control consol circuit board has just been... [Read more]
Mend thermal cut tripping
2

Un Vented Santon Premier Plus PP210E Thermal Cut Out Keeps Tripping Out?

I have a Santon Premier Plus PP210E un vented hot water cylinder in a flat that is only heated by electric. It... [Read more]
Mend electrical fault repair
1

mira 10.8kw tripped rcd and then would have o hotwate when switched back on?

re: switch off all power to the shower and locate and disconnect the terminals to the heater element. Use a mu... [Read more]
Mend indesit drying checked
4

How can I fix my Indesit WD12 washer/dryer?

There is no heat during the drying cycle. I have checked the operation of the heater fan -OK and the element s... [Read more]
Mend washing machine heater element thermostat
1

what is the wireing for the heater element servis m3104w?

the belt has come off and pulled the wires of the heater element and also the thermostat well i think thats wh... [Read more]

How to mend ...

Find out how to mend just about anything howtomendit.com for free repair help, information and advice.
Mend Dishwashers ...