My Indesit WIL133 has the red door led flashing rapidly and the left hand green led for delay timer flashing every second.
Have cleaned filter and outlet hose, pump impeller runs, machine fills on rinse setting and empties on empty cycle but then goes into fault mode, pump is a little bit noisy.
that comp always says its the main module not heat,main module,not fill main module,not empty main module check the simple thing like the pump mate the bearings are very cheap in the pump and they are very easy to damage,but up to you if you can move the impeller side to side with your finger the pumps worn
mm
August 2013
David, this is an F08 heater relay fault. You need to change the main module in the back of the machine. We stock it at £59.88 + £6 postage (exchange). This is ready programmed for your model number. To order, go to our website at www.emwelec.co.uk and put WIL133 in the search box or call us on 01159652118. You will still have the option of returning the module within 14 days for a refund (less our handling of £12) if it does not sort out the problem. Tony EMW Electronics
www.emwelec.co.uk
August 2013
Is that what the error code indicates? The pump works well.
howtomendit.com for free repair help, information and advice.
