Hi can anyone plz help my leg is driving me mad this hasba 2.4 durotec on a 2002 plate when I bought the vehicle the ignition.has been hardwired straight to he relay as immobilizer fault the key and transponder are strapped to.the ignition as its had a new barrel and key and has been like this for a.year I know of now with no problems however I had starting problems a.few weeks.ago.which turned out to be a a loose wire repair on the battery live wire and it has been fine. Since only now its started to click like.the starters packed up more often than not then I leave for a bit and sometimes it starts any ideas I have fitted a.New starter this morning cheers Jonathon
I would remove the starter,get a torch and slowly turn the engine by hand and have a look at the flywheel ring gear,also when you removed the old starter was there a lot of grey powder present? Dual mass flywheels are bad for going on these
cdc
January 2013
Automatic Answer
We may have found other answers which could help you.
howtomendit.com for free repair help, information and advice.
Try fixfault.com to fix vans.