washing machine stops in the 1st phase of wash everytime?
my fisher & paykel Model No MW511 stops working everytime in the 1st phase of wash. i can drain the water and start over again. once its fills water its runs for few seconds and stops again. some time its works all right but since few days nothing is happening.
If you are sure that when it beeps the 8 lights along the top row show the left hand light off then the next 3 are on and the 4 on the right are off then call a service company. It means the control board is detecting a high power use by the motor. It is usually a fault in the control board and it will have to be replaced. A service person will check the motor & decide which needs replacing. Continuing to start it & try to run it may result in more damage & a higher repair bill.
Lincoln Appliance NZ
January 2013
once the water fills up then it starts its wash process and within seconds stops with continuous beep (beep beep beep beep)
there are three lights on when it stops. they dont flash.
next to power button leave 1st light then 2,3,4 r on.
Nis
January 2013
Need the full details. Does it beep when it stops? What lights along the top row are on when it stops? Are any lights flashing?
Lincoln Appliance NZ
January 2013
I can answer this question...
washing machine stops in the 1st phase of wash everytime?
howtomendit.com for free repair help, information and advice.
Try fixfault.com to fix washing machines.