Mend > Electric Cookers

How do I remove the back cover on my Neff oven door?

Unable to separate outer glass from inner metal frame, there are 6 screws 4 for the hinge assembly and two at the top to secure back cover. there are no screws at the very bottom and the glass appears to be bonded to the back cover, I have a hinge problem and I need to replace them. Any suggestions.

Duke
May 2012

Neff Kitchen Appliances, Electric Cookers Neff Door Inner

I will give it a try. Many thanks for your help

Duke
May 2012

Yes did one today and have done loads heres how:- Lay the door down with the hinges pointing up, undo the two screws at top of door now the door SHOULD separate but you will find the seal has stuck the two together, run a stanley knife down each side keeping it tight to the top panel so you dont split the seal at the same time as you pull the panels apart. ps. Neff recommend you change the hinge sockets in the oven frame as well as they have modified them. To fit these remove oven and lay on back remove screws at top this will allow you to pull each side of the base back far enough to remove the sockets. Cheers

Kenjo
May 2012