Hi I have a Bosch 900 front loader washing machine it is 7 years old. It goes thru the whole cycle, brings in water, drains but the drum does not move during the wash cycle or spin cycle. I checked to see if the drive belt was broken but it was still in tact. Any advice would be appreciated
How do you remove the drum from a MAXX WAE18060 front loader.
It appears tha the drum has dropped in the plastic inner shell
Many thanks
Stewart
June 2012
Also try earths & connectors to brush assemblies. May be loose Also filter box at bottom front right. May be blockage. A $2 coin can cause blockage and inhibit drain/spin. Good luck
Justin
May 2012
Problem most likely carbon brushes in the motor worn. (they are black carbon strips with a spring behind to pass elctricity to the armature, the rotating part.) Remove wire from them and slide brass tag to get them out these black strips are what should be 8mm long.
Kenjo
April 2012
Thanks jj, is the brave clutch assy part of the motor? As I have managed to pull the motor off and was going to get it tested. Also what do you mean need to be more than 8 mm long at least?
Cheers
Tony
April 2012
problem with brake/cluth assy or worn brushes on motor,need to be more than 8mm long at least
howtomendit.com for free repair help, information and advice.
Try fixfault.com to fix washing machines.