Mend > Dishwashers

how can I fix my dishwasher?

It will not fill with water. There is no mains to the solenoid to release the valve to let the water into the dishwasher at the beginning of the cycle. the display works ok. Is there anything else it could be other than the processor board?

bob
March 2012

Kitchen Appliances, Dishwashers Water Valve Display

Anti flood switch or broken wire from control down to inlet valve or wire from other side of valve going to neutral.

Lincoln Appliance NZ
March 2012

depends what make and model we are talking about.ALL dishwashers are not the same.Antiflood base float switches sometimes stop power to inlet valves

ck
March 2012

Automatic Answer

We may have found other answers which could help you.

Click here for Water Valve Display

Free repair help for dishwashers

Water won’t pump out?

Hotpoint Start/Pause button flashing?

How to switch on beep on BEKO dishwasher?

How to install new knob for smeg dishwasher Type 10028; mod:?

Which way up is the upper spray arm - with holes uppermost o?

K8D45517?

Why is dishwasher not fully drained of water?

Clear E1 error code on smeg dishwasher with no water or leak?

How can I mend my Zanussi ZDLN1512 dishwasher?

Why is my SMEG Dishwasher showing E1 without water in tray?

Miele G1222 series dishwasher F14 error message?

Simpson Silencio 850 Dishwasher?

Mend Dishwashers

Related Categories

Mend > Dishwashers

how can I fix my dishwasher?

Automatic Answer

how can I fix my dishwasher?

I can answer this question ...

how can I fix my dishwasher?

How to mend ...

Mend dishwashers ...

Clear E1 error code on smeg dishwasher with no water or leak?

Why is dishwasher not fully drained of water?

Fisher & paykel Elba DW60CSW1?

BEKO dishwasher tripping the RCD?

Beko dl1243apw dishwasher?