optima xm alarm?

Firstly remove/isolate the power to the alarm panel

This is very important,and failure to do so may result in electricution or worse death.

Take the screw out from the right hand side front of main pannel.

Your battery is located at the bottom left hand side just behind the front pannel

. Take off the two leads red & black, remove the battery and replace.

put the two wires on the correct terminals on the battery. Red = live +. and Black on the negative = -.

Replace the cover and press reset.. job done.

The out side sounder will sound when you remove the battery.

Don't worry carry on with the procedure.

The panel will show all LEDs including tamper.

The reset will clear the system.

ensure you isolate the power to the panel first before you replace the battery.

In some cases the panel may revert to factory default,so have the user manual at hand.

If you don't feel confident in these aspects get someone in who does.

isolate the power first..no name
January 2012

lets get this right from the start shall we.

when you tell a op to open a panel
the first thing you say is to isolate the mains power coming in.

not at the fuking end.

savvy

You anchor
January 2012

Take the screw out from the right hand side front of main pannel.

Your battery is located at the bottom left hand side just behind the front pannel

. Take off the two leads red & black, remove the battery and replace.

put the two wires on the correct terminals on the battery. Red = live +. and Black on the negative = -.

Replace the cover and press reset.. job done.

The out side sounder will sound when you remove the battery.

Don't worry carry on with the procedure.

The panel will show all LEDs including tamper.

The reset will clear the system.

Take extra care when removing the battery as the panel is live

You can isolate the power to the panel first before you replace the battery.

In some cases the panel may revert to factory default,so have the user manual at hand.

no name
January 2012