I need a manual for my Ryobi Grass scorpion model u.s.a. RCT2800A?

Send to lionelXXXZYYYYQAAA and I will reply with a copy of the manual. Replace XXX with 247 and Z with (at symbol) and YYYY with zoho and Q with a dot and AAA with com.

Cheers!

Lionel.
January 2013

i also need the manual for the same .. can someone help me out?

Jatinder
March 2011

I got mine working, its a Ryobi RCT2800AD. The spark arrestor (location in the manual) was clogged so I pulled it out, could not find a replacement but works fine without it. While the covers were off I cleaned the whole engine with degreaser, rinsed and dried it out. I also washed the air filter with soap, dried it and poured a little oil onto it as recommended in the manual. I screwed up the idle screw (clockwise) a few turns, put all the covers on, then followed the starting procedure. Prime the fuel by pressing the priming bulb a few times till you see sufficient fuel running through the lines. Put the choke lever in position 1 and pull the starter cord 5-10 times (throttle trigger fully in). Put the choke lever in position 2 and pull starter cord (don't forget to hold throttle trigger fully in), it should start. Hold throttle in for 30 sec to 1 min till the machine warms up then put the choke lever in position 3. Cut your grass.
I had to replace the fuel lines later as they had gone soft and started leaking. It doesn't idle without the cutting line turning, as I adjusted the idle screw it konked out so had to leave it idling high. Otherwise it works well, even without the spark arrestor. I can't remember where I downloaded the manual but it is on the internet somewhere, search specifically for ryobi rct2800ad manual.

Good Luck.

Lionel.
December 2010

Hi Pepper, is there any chance you can email me a copy of this manual?

wizard
April 2010

I have a manual and will scan it for you if you still want it. Give an e-mail address and I will e-mail it to you. I am in Melbourne Australia and it was bought here in Aussie. It's probably no different and was purchased 21\10\1995.

Pepper
March 2010

I was able to call the Ryobi New Zealand help line and they emailed me a copy of the user manual.

Cam
July 2007

Find it? I have a RCT2800 with the manual and can send you the operator's manual (mail or scanned) if of any help. Our problem in France is to find a line reel (mine is out of order).

jean
May 2007

http://www.ryobi.com.au has info and free downloads of some manuals

cp
November 2006

I was also looking...found stuff here
http://www.texas.dk/texas/drawing/list.jsp?FormAction=null&ProductGroupSubID=8
is a Danish website. The 2800 parts manuals at least is in english.. has some info which may be useful...

Paul
October 2006