How can i tune a new channel to my Sony KV-M1400U TV?

Plug in the scart then on the tv to the left there is 3 buttons press the first button then press the button next to it. a square with arrow going though it will appear on your tv at the top right you are now tuned in.

Richard
September 2014

Yes! I did it!
I have this TV for 4 months now, without using it!
Thank you very much!!!

Maria F. A.
June 2010

Very many thanks - I had the same problem - and its now sorted !

Rob H
March 2008

Didnt know where to log a BIG BIG THANKS been searching for ages for this answer nearly binned the tv but all channels up and working as per your answer worked a treat will use your site again if I get stuck. Came across your site by mistake but good job I did cause you were the only ones with the correct answer.

Mags
August 2007

Otherwise, you can obtain even better results off the P.S., by connecting it to the rear scart input using a suitable AV cable.
In which case no tuning is required, although it may still require a remote to switch the AV input on. Unless, PS has auto-scart switching. Check your PS manual.

Cobweb
January 2005

You must use the remote control. No tuning is available on TV.
Sony RM-S04B is an available replacement, if you do not have the original at about £15-20.

1. Press and hold down the [White Arrow Up] 'shift' button.
2. While held down press the UHF tuning button (symbol for button is ->).
3. Press + or - to tune up or down the UHF band as required, until the required station is reached.
4. Select a spare Channel Position.
5. Press [Arrow Up] & [UHF Tuning ->] buttons again to store and exit tuning.

Cobweb
January 2005