hi there is it still driveable after it is broke,or get it recoverd to the garage my tranist is on a 2003 thanks howard.
howard
November 2011
not too bad to do,slacken bottom clamp/mount bolt-13mm,adjusting arm bolt to engine block and adjuster bolt,again 13mm and move pump into block to slacken belt and remove,refit and use a lever to carefully tension belt,don`t overtighten.tighten all bolts.
p.s.some bolts were 10mm on some later models
cdc
November 2011
Automatic Answer
While you wait for answers, we may have found some information which could help you.
howtomendit.com for free repair help, information and advice.
Try fixfault.com to fix vans.