how do i bleed a clutch on a vauxall combo van 53 regerstration clutch pedal went to floor and did not come back up realised a pipe was off which was should of been conected to gear box put this back on and pedal works now but no pressure there can any 1 help thank you
if you don`t have access to a pressure bleeder then top up master cyl. get someone to sit in driver seat and someone at slave cyl bleeder.The bleeder has to be unscrewed a good whole turn on these before they open,11mm spanner,pump pedal to floor and open bleeder,shut off bleeder,pedal up,pedal to floor-open bleeder,watch for air/fluid from bleeder,shut off bleeder-pedal up and so on etc,also you can try pumping up pedal a few times then hold down and again release and close bleeder,have a go good luck.
cdc
October 2011
Automatic Answer
We may have found other answers which could help you.
howtomendit.com for free repair help, information and advice.
Try fixfault.com to fix vans.