f & p intuitive - stuck on 1st rinse?

took pump out --seems ok and cleared hose

put on wash --seems to be just 1st rinse --stop and starts spin-- with water squirting in --i thought it has stop --and fill up to adgitate--slowly -just keeps on 1st rinse ( SPINNING?)???

not sure how the cycles work --can i d/load book?

really really fed up

FED UP JACKY
October 2011

latest --
will not pump out now --goes to code 62

will try to inspect pump --not sure how

help please

EVEN SADDER --JACKY
October 2011

many thanks nz
but seems pump is clear --as all the water drained out -- but stayed on 1 min. spin at end .
we advanced it to 2 cnd wash -but at end still kept spin --1 min,
we had code 62 ( pump ) a couple of times LONG LONG before

sounds maybe electronic ( yuk new m.c ??--over 8 yrs old)
fed up jacky

STILL UNHAPPY JACKY
October 2011

After the wash cycle is it draining the water? If no then that is the problem. You need to check why the pump is not draining. If you can hear a slight humming sound when you put it on spin then that is the pump trying to go. Next step will be to remove the water and then unblock the pump.

Lincoln Appliance NZ
October 2011