What would be the reason of K Carriage jam? It is not related to the tension or the yarn. Even without the yarn, it gets jammed in both sides of the carriage.
Thanks,
Jane
Thank you very much for your response. I will keep it in mind for the future. This time it is just old and very dense oil. Looks like the machine was not in use for a long time. I cleaned the old grease completely in the carriage and the bed, and re-oiled it. The carriage runs without any jams. now.
Thank you,
Jane
Jane
August 2011
Hi Jane,
Have you checked the condition of your sponge bar? If it is not exerting enough pressure on the needles they will sit too high and cause problems. The foam needs to be at least 1/4 inch above the metal bar along the whole length.
If you need a replacement, Metropolitan have them in stock.
Regards,
Sue
August 2011
Automatic Answer
While you wait for answers, we may have found some information which could help you.
howtomendit.com for free repair help, information and advice.
