what tool do i need if any for ford transit 03 clutch slave cylinder thanks?

you will need a torque spit and a ratchet.
you could probably buy a cheap set from super cheap.
usually cheap enough to buy in a set although i think the one you want is a T35.
a bit tricky to fit if you r fitting one on a semi automatic and if you fit it wrong the cylinder will come apart and piss out fluid from the bell housing.
you can re assemble it but not something i would recommend if your not confident

mark
August 2011

not sure but if you remove the horseshoe clip holding the hose into the slave cyl. and remove the hose,then I think you have to turn slave cyl. a/clockwise to remove from bell housing,sorry can`t be more specific.

cdc
July 2011

sorry its a rwd there is a pipe and a bleed nipple and the cylinder is ovel shap going into arourd whitch gos in the bell housing is it a ser clip a bolt thanks

stirling
July 2011

don`t think you need any tools,you haven`t said if its fwd/rwd,if its fwd then its a g/box out job.

cdc
July 2011