i have a glowworn compact 75.It pressure bar is on zero it should be on .7 bar.Before that it was on .7 bar .Now i dont know how i can fix this problem .
The filling loop should not be attached to the boiler/system, water byelaws...If it is repressurise system by turning opening valves at each end of the braided filling loop to 1 bar then bleed every radiator making sure the pressure is topped up/replaced - turn off and remove the Filling loop. If you cannot understand this call a Corgi registered heating engineer.
Brian
September 2006
it needs refill with the filling loop under the boiler you'll see a flexable braided pipe thats the filling loop from the mains water
hi-spec plumbing
September 2006
Automatic Answer
We may have found other answers which could help you.
howtomendit.com for free repair help, information and advice.
Try fixfault.com to fix home heating systems.