initial power up on r8 not working?

acorn,i admire you,you have more patience than i do,i dont suffer fools gladly,we have tried to help this guy out,i gave him the answer in the first link,he chose to ignore it,and asked you guys again,
i mean no disrespect to the guy,its just he not alarm engineer,so he not have our experience,he was given the answer by all of us,but choose to ignore it,so i leave it in you guys hands,

gts
June 2011

If the Tamper light is on and the panel bleeps 9 times an extended display reveals more information about the source of the tamper fault(s). To toggle between the normal display and the extended display press Omit. The extended display is distinguished from the normal display by the Unset light being off.

I'll leave you to find out the rest

acorn
June 2011

Amazing isnt it, the manual comes with the panel. Is freely available on the net.
Yet some halfwit cannot be bothered to read it or do basic testing.
Nor seem to accept a professionals advice.

Alarm
June 2011

As it says at the bottom of the page. "In many instances work should only be undertaken by a qualified professional" obviously too difficult to read the manual.

TomTv
June 2011

Second time.

Direct quote from Veritas manual >>

"Unit will not set and bleeps nine times.
The system has a tamper fault ................"

Believe it or not we know what we're talking about.

It's your fault finding abilities that are lacking.

acorn
June 2011

Ask 8 more times, then look in the book of words.
9 beeps as indicated mean something.
I wish sparks would keep to themselves when alarm systems are concerned. And YES I am qualified too before you wet yourself.
Same goes for Fire and CCTV and Access, FFS if you know nothing dont mess with it!

And, to ad a R8 isnt a major system. It is basic, my sons can programme one in 5 mins.

Alarm
June 2011