How do I chande a starter motor on a vauxhall combo diesel van 1.4?

i have seen the top bolt but what sort of torx 50 tool is best to get onto it socket or key spanner other?

grace
May 2012

think you may have the 1.3 cdti in your van,unclip collant reservoir,swing to front,remove two 13mm nuts holding fuel filter to bulkhead and swing over onto engine,disconnect battery,look down on top of bellhousing for an oval grommet and remove,in there is the top bolt for the starter,torx 50,dont drop this bolt or a socket in there or it is a g/box out job,jack up and support with stands and remove the lower torx 50 bolt and wiring connections on starter and remove,refit in reverse,usually have one person up top for the top bolt and one down below for the starter,good luck

cdc
June 2011