washing machine will not drain?

Not machine specific. Could be filter is blocked. usually on front of m/c. at the bottom you will find a fitting holding the filter, might be behind a panel along the bottom, try pulling it off, usually about 2 inch dia. plastic bit. unscrew it, clean the filter out. IF there is water in the tub, IT WILL COME OUT. Unscrew slightly, with a tray below, close back when tray is full keep repeating until empty. The filter should be cleaned out on a regular basis, check your instruction manual. Failing that, could be control or pump or wiring etc.

SD
April 2011