How can I get my Philips CCR600 out of Safe mode?

hold the AS button while turning the radio on, keep AS pressed until it says code.

0000
February 2011

Please note that code entry is only possible with the ignition switched on, and in the order shown below. If the display shows a number less than 10, and the word SAFE, then the unit may be codelocked. If this is the case, leave it switched on for up to two hours and a further attempt at code entry should be possible.

To give you some idea of how long you'll have to wait before you can attempt re-entering the code if you do get it wrong:- (and by wait, that means having to leave the key in the ignition, turned to position one, and the stereo switched on as well)

Attempt 1 - wait 10 secs. (Display shows 10SAFE)
Attempt 2 - wait 10 secs. (Display shows 9SAFE)
Attempt 3 - wait 10 mins. (Display shows 8SAFE)
Attempt 4 - wait 20 mins. (Display shows 7SAFE)
Attempt 5 - wait 40 mins. (Display shows 6SAFE)
Attempt 6 - wait 80 mins. (1 hr 20 mins) (Display shows 5SAFE)
Attempt 7 - wait 160 mins. (2 hrs 40 mins) (Display shows 4SAFE)
Attempt 8 - wait 320 mins. (5 hrs 20 mins) (Display shows 3SAFE)
Attempt 9 - wait 640 mins. (10 hrs 40 mins) (Display shows 2SAFE)
Attempt 10 - Time to re-write the bin - on the eeprom (Display shows 1SAFE)

xxxxxx
February 2011