I have just replaced the cut out kit using a 9509013 repair kit as detailed on the dimplex site BUT MY HEATER STILL DOESN'T TURN ON.... Any suggestions?
Nick
January 2012
The most common fault is what has just been described above. The thermal cut out burns out due to the bad design, ( Being mounted directly on top of the brick housing)
I am an engineer and can supply/ supply fit the retro fit thermal cut out which can elviate this problem for good. Call Thomas on 07593127100.
Thomas
March 2011
you will need to check the cut out by removing the front panel,if its burnt up it will require a repair kit
toptrish
February 2011
Automatic Answer
While you wait for answers, we may have found some information which could help you.
howtomendit.com for free repair help, information and advice.
