take brake reservoir cap off crack wheel nuts jack 1 side at a time up support with axle stand take wheel off then pull spring clip off caliper (front facing ) at rear of caliper is 2 bolts uno them slide caliper off support it push brke pads out wire brush where brake pads go in sides then use a G clamp to push piston in put brake pads back in spring attached 1 into piston and rverse fit same on other side when done pumpbrake pedal till hard then put reservoir cap back on (its located behind air box left side good luck
peesian
January 2011
howtomendit.com for free repair help, information and advice.
Try fixfault.com to fix cars.