miele tumble dryer?

Sounds like it's not heating, OR not sensing the load.
Try it on the ' warm air' setting which bypasses the sensing circuit. If it gets warm, then the heating is ok so is a problem with the sensing circuit.
If it doesn't get warm then it's a problem with the element(unlikely), thermostat on the element( some can be re-set), OR the heater relay circuit board.

Bernii
January 2011

hi. something to check is that all the filters on the machine are clean every use.if its got seperate condense draw to empty or pipe fitted to waste outlet is unblocked.. with miele the machine will go into engineer mode on panel display if in confin space with no ventilation around it as over heat sensors shut it down.

marti
January 2011