Mend > Dishwashers

How do I remove facia/control panel from AEG Favorit 40650 dishwasher?

My dishwasher has stopped heating and I need to check the PCB. I have removed the 4 Posidrive/Philips self-tappers along the top of the door but the panel won't budge.

What else do I need to do, in order to remove the facia/control panel from AEG Favorit 40650 dishwasher and access the PCB?

Thanks.

Rob
December 2010

Philips Kitchen Appliances, Dishwashers Aeg Favorit Check

Thanks a lot CK.
Your quick response is really appreciated and (as you indicated), removing those screws on the side freed it immediately.

Rob
December 2010

4 screws across top edge
1 screw down each side
You might have to remove the 3 screws below on either side down the inner stainless door which actually holds the metal door outer on.by removing the metal outer door panel gives you lots of access to lower the control panel down to work on it.for the sake of 6 screws well worth it.Mark all the connection to the pcb or take a photo.make sure you put them back in the same place and also the right way up/around as you can fit them either way which then causes problems

ck
December 2010