change front wheel bearing on corsa combo van?

jack up veh.support with axle stands,remove wheel,t/rod end,caliper and bridge and disc,tie caliper to strut to support hose,remove abs sensor torx 30,two 18mm bolts on strut,c.v joint hub nut,lower balljoint bolt and remove hub assy from lower arm,now is the time to remove circlips and remove bearing from hub carrier and you will need a hydraulic press to achieve this,if you have no access to a press you may have to purchase a complete hub assy from a scrappy,rebuild in reverse,good luck

cdc
December 2010