Recent: Will I need to replace my garden tap?

Mend > Washing Machines

Mend Fisher & Paykel GW712 Washing Machine Error Code No Start

F&P GW712 has power but will not start cycle, error code?

The machine has power but will not start the wash cycle. When I switch the power on the 8 LED lights turn as a follows from left to right (on =1, off =0, flashing =2): 02111111.

When I press start the flashing light turns off and nothing else happens. I would welcome any advice as to the problem and how to fix it. Thanks

Peter
December 2010
Thanks for advice MK, sounds like I need to call technician.

Peter
December 2010
There is no error code which has one light flashing. If all these light up & one is flashing as soon as you turn power on then I would say either the main control board or the display board is faulty. Switch power off at wall & pull out the wall plug. Leave unplugged for several minutes then plug back in. If fault is still there call a technician.

Mk
December 2010

Automatic Answer

We may have found other answers which could help you.

Click here for Washing Machine Error Code No Start

Related Questions ...

Mend washing machine error code drain
1

my Samsung j1453 washing machine is displaying the error code LE8 ?

My Samsung j1453 is showing an error code LE8 and fills up to start the cycle and does nothing but flood the ... [Read more]
Mend washing machine repair error code
11

How do I fix my Fisher & Paykel GW709au?

This washing machine has been out of use for about 18 mths. I finally decided to have a go at fixing it and r... [Read more]
Mend washing machine displaying
1

How can I fix a Zanussi Jetsystem 1400 washing machine displaying error E40?

The machine stopped in a middle of a cycle for no reason. Now whenever I try to start a cycle after a minute i... [Read more]
Mend zanussi washing start
1

E 51 Zanussi jetstream washing machine?

Zanussi FJS122SW pause start button problem? The pause start button appears to be locked in pause Type P6347... [Read more]
Mend washing machine error code zanussi
2

washing machine Zanussi, ZI 161 w?

I will like to describe the problem a little more. The machine stopped shortly after it started washing and, ... [Read more]
Mend washing machine error code door lock
1

Zanussi washing machine stops half way through cycle - no error code?

Zanussi washer dryer ZWD16270W. It stops half way through the cycle. There is no error code displayed the time... [Read more]
Mend washing machine error code clicking noise
1

AEG 72640 programme sel. clicking noise?

AEG washing machine will not start, clicking noise comes from programme selector area, door and pause/start li... [Read more]
Mend washing machine blockage motor
1

Ariston A1535 UK Washing Machine - Keeps Failing?

Hi, We have an Ariston A1535 UK washing machine that we purchased about five and a half years ago. During t... [Read more]
Mend washing machine error code control panel
1

My Zanussi FJDR 1466 W washing machine does not start cycle?

My Zanussi FJDR 1466 W washing machine does not cycle start. There is power onto the control and water turned ... [Read more]
Mend error code drain washing machine
5

Washing Machine Hotpoint Ultima WF 860 1600 Spin?

When the washer finishes its wash cycle, it drains the Washer. Then just before it starts or tries to start ... [Read more]
Mend washing machine error manual
2

Whirpool AWM 8123/S Washing Machine has F18 error code?

This isn't in the manual which only mentions F4 to F15. After switching on the display goes to "F18" after a ... [Read more]
Mend washing machine error code zanussi
29

Zanussi Washing Machine displays an error code E90?

My Zanussi Washing Machine displays an E90 error part way through the cycle. You can press start and the cycle... [Read more]

How to mend ...

Find out how to mend just about anything howtomendit.com for free repair help, information and advice.
Mend Washing Machines ...