Recent: Replacement battery cover?

Mend > Home Heating Systems

Mend Baxi Solo 40/4 Boiler Burner Flame Heating

How can i fix this problem?

My Baxi Solo 40/4 wall mounted boiler stopped 2 days ago,the pilot light went out,, I re-lit and the burner flame ignited all was well..today its done the same. I can re-light the pilot no problem but when it calls for the burner flame for heat it clicks and switches off again.problem started when the snow came. Is it a case of re-setting something or calling a professional.

Mr Mark Stevenson.
December 2010
sounds to me like your gas valve is playing up, i assume your boiler flue didnt get full of snow? i also assume your pump is working ok if your boiler has a fan is it running, in any case it sounds like an engineers job good luck

jon
December 2010

Automatic Answer

We may have found other answers which could help you.

Click here for Boiler Burner Flame Heating
Mend boiler heating fault
1

Home heating systems?

Further fault Glow-Worm F100 gas boiler. When the boiler starts up the burner flame comes through the pilot l... [Read more]
Mend boiler heating ferroli
1

no heating or hot water, boiler will not fire up?

Ferolli 600 Pilot flame on Fan running Water pump running ... [Read more]
Mend heating pressure fault
1

How can I fix my potterton peforma 24 boiler?

The boiler comes on but the burner/flame light does not come on at all. The flame fault indicator also does no... [Read more]
Mend boiler heating hot water
3

Halstead Ace High Boiler Burner not igniting!!!?

I hope you can help me as I have very little spare money and can't afford to call out a plumber. I have no hot... [Read more]
Mend Worcester Boiler Ignition
2

boiler works for a short period?

i have a worcester 28si mark 2 it fires up on hot water or central heating and works fine for a while then cut... [Read more]
Mend boiler thermistors diverter valve
2

Heating/Hot Water Problems with Ravenheat RSF100ET?

Hi Original problem was not very hot DHW, but burner running flat out. Changed both DHW and CH thermistors, ... [Read more]
Mend boiler heating fault
1

worcester 350 combi 10 years old two pumps?

the pilot lights but the flame doesn't spread across the burner to the flame sense electrode this happens on b... [Read more]
Mend 30 heating fault
1

Betacom 30 heating fault?

18 month old Betacom 30, hot water function works just fine. call for heat and problems start. Pump & fan run ... [Read more]
Mend heating temperature overheat
4

Worcester 19/24CBI Problems (Over Heating, Fail to ingite)?

Hoping that someone can shed a little light on my problem or that this may help someone in a similar position.... [Read more]
Mend central heating burner sensor
2

What is the problem with my baxi 105e instant, ?

In hot water mode everything seems to function as it should however when central heating is required the boile... [Read more]
Mend combi boiler central heating boiler faults
2

Central heating combi boiler?

Hi, I have an old Myson Midas si combi boiler, it requires constant attention and still has a couple of faults... [Read more]
Mend boiler light hot water
3

Myson orion 30b?

Hi,My boiler poilet will light but when either the heating or hot water calls for a command i cannot get full ... [Read more]
Mend boiler heating ignition
1

heating?

vokera 14se fires up but flame fluctuates then drops out. it stays on if i take the boiler burner casing off. ... [Read more]
Mend central heating boiler burner
1

Baxi Genesis 80 - no central heating?

The boiler does not run properly - I get about 10 seconds of flame on CH, then burner goes off. On HW it is ru... [Read more]
Mend boiler burner ignition
1

Can anyone advise on my boiler problem?

I have a Potterton Profile 80e and the burner keeps blowing out straight after ignition...the flame is really ... [Read more]

How to mend ...

Find out how to mend just about anything howtomendit.com for free repair help, information and advice.
Mend Home Heating Systems ...