I've got a Vaillant ecotec plus 831, and pressure's low. Not F22 low yet but getting there. I know I just need to turn a flathead screwdriver for a few seconds to increase the pressure in the system. But I've taken the bottom of the cupboard off, and there's at least 5 things I could turn...
I've put a picture here to help:
http://img213.imageshack.us/img213/6144/boiler.jpg
Can anyone tell me which one(s) I need to switch to increase the pressure?
i had same problem both valves were letting frew slowly i had to put an isolation valve in between the inlet hose
luke
February 2011
Hi I have a Vailant 630 system boiler and the pressure goes up to maximum 3.3 bar and im force to take water out from the radiator to decrease the pressure, I just changed the expansion vessel and pumped it before conecting it to 12 psi as per instruction I have also changed the pressure sensor, as I said I set the pressure initially at 1.3 bar after few hours it reaches 1.9 and the following day is at maximum 3.3 bar. Can someone please advise what to do, many thanks
Darius
December 2010
Thanks guys.
Mark
October 2010
turn c inline with pipe slowly to put pressure into boiler.turn the slot across pipes c and d to close loop properly.
deano
October 2010
c
BRUCEY
October 2010
Automatic Answer
We may have found other answers which could help you.
howtomendit.com for free repair help, information and advice.
Try fixfault.com to fix home heating systems.