hi, i have a triton t80 si. for some reason now i have to turn the temp up to about 8 to get warm water but as a result the output from the head is rubbish. can anyone please help?
Turn on shower and light goes out with no water flowing at all
Any ideas ????
andy
December 2010
hi, thanks for the help. i've cured it now, the problem was one of the micro switches that put power to the heater element. i think there was some play in the pressure operated lever mechanism that operates them, some play must have developed in it over the years. the way i cured it was to wedge a thin piece of plastic under the lever to counter act the wear, and its sorted!
rich
October 2010
open up shower on the outlet pipe there is a cutout with 2 blue wires attached if they are burnt up or have melted the part needs replacing,if not it could be an element
steve.e
October 2010
Automatic Answer
While you wait for answers, we may have found some information which could help you.
howtomendit.com for free repair help, information and advice.
Try fixfault.com to fix plumbing.