Hi,
I'm having the same issue. Still trying to find a belt that is the same size. First two are too big. I can get the top off and the bottom flap where the spool is but can't get the back off to put belt around the drum as wires etc. are all attached to it. Please, pelase could you help me out and advise what you did?
Thanks
Nicki
August 2013
NOT as easy as CK states!!! You need to unscrew the back of the machine, fit the belt over the drum, from the front, then attach to the motor pulley and turn/twist the drum until it slips on all the way round. Refix all the screws into their original position.
Hope that helps!!
BRP
October 2011
basically remove all the screws from the back and work your way in
ck
September 2010
Automatic Answer
We may have found other answers which could help you.