Hi,
During the drying cycle the machine stops beeping constantly and flashes fault E20.
What is the cause and the cure ,can anyone advise please.
Thanks
John H
filter blocked
faulty drain pump or a blocked condensor
put the dryer on and when its been running for 10 mins open the soap draw a little and listen.if you can hear a gurggling noise the condensor tank is blocked.you will need to remove the rear half of the cabinet and then you can remove and wash out the condensor
ck
September 2010
Automatic Answer
We may have found other answers which could help you.
howtomendit.com for free repair help, information and advice.
