how can i get my ccr 600 in safe mode?

like to say thank yo to Jonesy for helping me

francis martin
May 2012

you must press and hold at end.

Code Entry as Follows:
Turn Off Stereo
Press & Hold Preset " AS " and
Switch Radio On - Display Shows
" SAFE " And Then Shows " 10 - - - - "
Press preset " 1 " repeatedly for 1st Digit
Press preset " 2 " repeatedly for 2nd Digit
Press preset " 3 " repeatedly for 3rd Digit
Press preset " 4 " repeatedly for 4th Digit
If the correct code number is now shown
Press & Hold Preset " AS " Until the Unit Beeps

hay88
September 2010

oh cheers thats brilliant! do you know the correct procedure before i get to put the code in eg ignition off radio off ignition on etc i keep getting told different ways its cracking me up!!!!!!!! oh and when you say ignition on 1st position that mean with no lights on??
thansk for your help!

jonesy
September 2010

make sure no one touch's any button because if they do your wait time start's from the begining.
To give you some idea of how long you'll have to wait before you can attempt re-entering the code if you do get it wrong:- (and by wait, that means having to leave the key in the ignition, turned to position one, and the stereo switched on as well)

Attempt 1 - wait 10 secs. (Display shows 10SAFE)
Attempt 2 - wait 10 secs. (Display shows 9SAFE)
Attempt 3 - wait 10 mins. (Display shows 8SAFE)
Attempt 4 - wait 20 mins. (Display shows 7SAFE)
Attempt 5 - wait 40 mins. (Display shows 6SAFE)
Attempt 6 - wait 80 mins. (1 hr 20 mins) (Display shows 5SAFE)
Attempt 7 - wait 160 mins. (2 hrs 40 mins) (Display shows 4SAFE)
Attempt 8 - wait 320 mins. (5 hrs 20 mins) (Display shows 3SAFE)
Attempt 9 - wait 640 mins. (10 hrs 40 mins) (Display shows 2SAFE)
Attempt 10 - Time to re-write the bin - on the eeprom (Display shows 1SAFE)

xxxx
September 2010