I have no water flow after replacing head gasket?

ok the waterpump is driven by a small belt behind the variator it also runs the oil pump so check this ok as if its broken you need to renew it b4 you ride it.also take the head off and take the thermostat out its screwed inside the head it wont hurt it to be taken out and will eliminate this as a problem.ps the waterpump is right inside the crankcases and cannot be seen easily at all

adam bike doctor
July 2010

also i'd check the water pump hasn't seized. if it has water wont circulate.

james
July 2010

yep dont use it again until you have found the problem. You may well have a air lock in it drain the water and start again.

bb
July 2010