will need to remove fixing bolts from under bonnet [think they also hold washer bottle bracket] also on convoy i think you can leave linkage in situ and just remove link rod circlips on motor bracket and where it fits to l/h side of linkage.you will also need to remove linkage rod from motor--be very careful not to break it ease it off gently !then you can lift out motor and bracket assy . make sure when refitting that you put crank arm in correct position or they wont park in correct position.
k
July 2010
remove n/s plastic glove box assy,2 philips screws on underside and pull off along the top,remove wiper arms and nuts onto wheel boxes,you will see the motor when the glove box comes off and think the wiper motor and linkage comes off as a unit,now would be a good time for a good look at the wheel boxes-bad for wearing! and rebuild in reverse,good luck
wickham
July 2010
Automatic Answer
We may have found other answers which could help you.
howtomendit.com for free repair help, information and advice.
Try fixfault.com to fix vans.