Mend > Electric Shavers/Razors

Braun Shaver AC/DC Power plug broken, can I use a normal 12V adapter?

Hi,
my Braun shaver AC/DC adapter is broken. No DC from the output. Here is the part.

http://www.service.braun.com/product/big_img.asp?artGrp=5494&partno=0067030456&l=GB&c=HK&pic=parts|xl|67030456_xl.jpg

Does anyone know how I can identify which wire is +ive and which is -ive? I am thinking to use an old AC-DC adapter as it is only 12V & 400mA output...

Thanks,
Tom

Tom
July 2010

Braun Braun 0067030456 Bathroom Appliances, Electric Shavers/Razors Plug 12v Dc

Braun Part No 5 496 for my 8590 shaver is Input 100-240V AC, 7W. Output 12V DC 400ma.

The polarity of the bit that goes into the shaver is positive on the top/bottom and negative on the sides with a no-load voltage of 14.78

HTH

Peter
January 2011

The simplest way out for you would be to purchase a new lead, I have about 35 in stock and they cost £15. If you play with an alternative lead you may damage the shaver as well!

www.sussexspares.co.uk

Jason 01273 329898
September 2010

they 400mA was written on the original Braun ac adapter itself so I guess it's OK.

Just need to identify the + & -. I suppose I can just guess 50/50 chance...

It looks like the faulty ac adapter is moulded plastic so no chance to repair...

tom-in-hk
July 2010

I have an old Philips electric razor here - the adaptor plug has 9W (9 Watts) written on it - at 12V that requires 1.3 Amps.

Assuming your Braun razor has a similar power requirement to my old Philips then 12V 400mA will not be enough power - just under 5 Watts.

Plan B is called for.

Good luck...

Peccavi
July 2010