Mine has same problem, I've been told today the switch is located directly above the brake pedal. You pull the plug out and to test it you arc it with some wire. I've not tried that yet, but have easily located the switch.
Emskii
July 2010
have you also tried giving the light units a direct to chassis earth ?
mart
May 2010
Locate switch at brake pedal,see if you can remove wiring connector from switch and get a small paper clip or split pin and bridge across terminals with ignition on,if your lights work fit a new switch,good luck
wickham
May 2010
Automatic Answer
While you wait for answers, we may have found some information which could help you.