Recent: Lg vcr?

Mend > Home Heating Systems

Mend Honeywell V4043H1056 Valve Boiler

how can i fix my motorised valve on boiler?

the red (lead) wire on my honeywell v4043h1056 motorised valve is loose.the heating does not come on anymore until the wire is moved.when this happens the heating comes on for a limited time sometimes only a couple of seconds.any ideas how to remedy this?

iain auchterlonie
May 2006
We have a motorised valve with faulty wiring and its performance was spasmodic.
If it is not connected to the boiler wiring ,the boiler does not light at all when firing c/heating only.
Until the wiring is tight and fixed the boiler will be spasmodic

terry cocks
October 2007

Automatic Answer

We may have found other answers which could help you.

Click here for Valve Boiler Honeywell

Related Questions ...

Mend heating thermostat engineer
3

Ideal Classic no heating but have hot water?

HI all, i have just found this fabulous site, I wonder if anyone could help as right now things are just miser... [Read more]
Mend boiler heating pump
1

Y Plan - Mid Position Valve 'fault'?

Hi, I have BGMVSP-23 'mid position' valve. (I believe a Y plan setup) Basically the pump only runs when ... [Read more]
Mend boiler central heating honeywell
3

Hot water but no central heating?

Hi, having an odd problem with the heating today. i can get as much hot water as i want but cannot persuade... [Read more]
Mend heating radiators system
3

heating, Oil boiler not running?

Having just drained my heating system to replace a number of failing radiators,I have re-filled the system but... [Read more]
Mend boiler central heating thermostats
2

C H Boiler heats D W only ie no C.H?

My C.H. system is fully pumped ie radiators & cylinder circuits with both room & cylinder thermostats. Could ... [Read more]
Mend central heating diverter valve thermostat
1

c h boiler heats HW supply only,no central heating?

My system is a fully pumped central heating installation, with room & cylinder thermostat. Could the motorise... [Read more]
Mend boiler heating hot water
6

Why can we only get heating when hot water on also now(Dual programer)?

We recently needed to replace head valve due to pump over run problem.(Boiler is Potterton Profile) On putting... [Read more]
Mend boiler heating radiators
3

No heating,but have hot water?

I have an Ideal Boiler elan 2 50F, the boiler comes on when hot water is required, however heating does not. R... [Read more]
Mend boiler heating ignition pcb
3

Ravenheat CSI 85AT fires up and goes of every 20 seconds?

I have a Ravenheat CSI 85at that is just over 3 years old. This is the one that does NOT have the honeywell ga... [Read more]
Mend heating boiler central
1

Worcester Oil Boiler?

I have a Worcester Danesmoor SLPJ 20-25 oil fired boiler which is fitted with a twin channel programmer and Ho... [Read more]
Mend central heating hot water boiler
10

Potterton Promax 24HE - No Central Heating?

Since the weather turned colder a couple of weeks ago we have been unable to have heating without the hot wate... [Read more]
Mend combi boiler heating honeywell
1

new valve and pump fitted heating fine no hot water?

Just had an engineer to fit a new c/h pump and 3 way honeywell v4073a motorised mid position valve to a combi ... [Read more]
Mend boiler heating fault
2

hOW TO GET MY BOILER TO LIGHT EVERY TIME?

POTTERTON PROFILE 80E. WHEN THERE IS A DEMAND FOR IT TO LIGHT THE IGNITION PILOT LIGHT IGNITES AND THE MAIN... [Read more]
Mend boiler radiators repair
2

Worcester oil heatslave 20/25 about 4years old. ?

When i ask for hot water I get the pre-heated hot water but when this is exhausted it runs cold. The boiler st... [Read more]
Mend system worcester tank
1

what thermostat/programmer should i get?

I have a brand new system, i have worcester bosch solatr panels going into an unvented tank and a w/b 30 cdi s... [Read more]

How to mend ...

Find out how to mend just about anything howtomendit.com for free repair help, information and advice.
Mend Home Heating Systems ...