Recent: Safely remove screen protector from a Macbook Air?

Mend > Washing Machines

Mend Fisher & Paykel Pride Only Cold Water

how to use only the cold water?

how do i use only cold water on a fisher and paykel pride model washing machine

mick
March 2010
Hot & cold inlet valves are connected inside the panel by the mixing chamber. If you only put a hose on the cold valve, the water will trickle out of the hot valve onto the floor while filling. If you only have one hose then you will have to buy a blanking cap from the store to cover the hot inlet valve. Then just select cold wash on the panel each time.

Lincoln Appliance NZ
March 2010

Automatic Answer

We may have found other answers which could help you.

Click here for Only Cold Water

Related Questions ...

Mend washing machine hot water hotpoint
1

no hot water?

I have replaced temp switch the water inlet valve and timer, the only way you get hot water is shut off cold... [Read more]
Mend washing machine appliances hotpoint
2

Cold water feed only?

Can the hot point firstedition washing machine work on cold water feed only
Mend ariston water checked
2

Ariston A1324 only pulling in cold water since move?

Just moved and since then our A1324 only pulls in cold water no hot, have checked all the electrical connectio... [Read more]
Mend fisher smart drive washing machine
1

How do i fix my fisher & paykel smart drive 601 washing machine?

Hello there we started having problems with the hot wash the water would dribble into the machine and noticed ... [Read more]
Mend washing machine fault water
1

zwg1120m fault?

Washing machine started filling with cold water only
Mend fill water cold machine
2

Simpson 22S700 doesn't always fill with water?

For some reason the cold water pressure gets lost and doesn't fill the machine (only drbibles in). No issue w... [Read more]
Mend problem works fine
4

Fisher & Paykel Smart Drive 508 - problem with warm/hot washes?

My Smart Drive 508 works fine on a cold wash but when I want to do warm it goes to hot and then light starts f... [Read more]
Mend washing machine blocked hose no water
1

simpson espirit 650?

turn knob wont work on wash first cycle and rinse, no water coming from tap. I have undone hoses and taps wo... [Read more]
Mend second hand good
1

Hoover Nextra HNL 642?

My mother got a washing machine (second hand) but in a very good condition. Its a new type with only cold inle... [Read more]
Mend washing machine start
1

how can i fix my fisher & paykel 015 smart drive washing machine?

When i start my washing machine it fills up only 2 inches then stops..The water only trickling in slowly with ... [Read more]
Mend washing machine inlet valve solenoid
1

How to fix inlet valve?

My LGwft8501tp is only allowing a trickle of cold water in. Checked inlet filter and supply OK. Is there a sol... [Read more]
Mend water paykel cold
1

How to fix intermittent water intake on Fisher & Paykel 508 washing machine?

Using cold water only (hot water line hooked up). Water intake stops and goes every 2-3 seconds and after abou... [Read more]
Mend water pump cold coming hot help
1

how do i get the water to pump in?

There was no cold water coming in only hot. now no hot or cold water will pump in . help. how do it?
Mend solenoid washing machine valve
2

What is the method of removing the hot and cold soleniod ?

Step by step could you please tell me how to remove and replace the Selonoid valve from a 051 smart drive fis... [Read more]
Mend error code washing machine rinse cycle
2

Fisher and Paykel MW512nz washing machine stops on wash cycle and rinse?

Does anyone know how to test your machine to get the error light code up to determine what is wrong and how to... [Read more]

How to mend ...

Find out how to mend just about anything howtomendit.com for free repair help, information and advice.
Mend Washing Machines ...