The belt and deck were pre-lubricated in the factory prior to assembly. The factory lubrication usually lasts 60-120 days depending on frequency of use. The FUSION TREADMILL comes with a small bottle of lubricant. This is enough to lubricate your FUSION TREADMILL twice (4ML). Lift the side of the 18inches/45cm drone the rear roller. Squeeze 1 ML under the left side of the belt and 1ML under the right side of the belt. Run your FUSION TREADMILL at 5MPH/8KMH for 5-10 minutes before exercising.
(From the REEBOK FUSION TREADMILL instruction manual)
M
February 2014