How can we top up the water pressure on a Greenstar 25Si?

Many thanks, Paul F. Worked perfectly.

Tony H.
October 2012

Also having a Greenstar 25Si/30Si, i had the same dilemma as Ron ! I had been snown how to top up the water pressure by the service engineer a few months ago, but i had forgoten how to do it! The manuel doesn't cover it at all!!! Been surfing the net for an answer for the last 30 mins; Want to thank Paul F for his advice! was spot on!
Ian B

Ian B
January 2010

Remove the bottom plastic slide out cover of the boiler. The fill 'key' should be fitted to a stowage on the cover. On the underside of the boiler there is a squarish white plastic valve, then the fill loop opening immediately to the right (this is where you insert the 'key') and then a black plastic valve. Insert the 'key' into the vertical opening and turn the white plastic valve anti-clockwise until you hear water start to fill the system. Close the valve when you reach around 1 bar on the boiler pressure gauge. Remove the 'key' (there will be a little bit of water when you do this) and put the key and cover back into place.

Paul F
January 2010

Read your manual Ron...

J
January 2010