macallister cordless 14.4 drill stuck in hammer mode?
took apart seperated gears and various shims .and naturally have been mixed up to become a jigsaw puzzle none the less. would really appreciate pdf diagram of springs and cogs. searched for hours on net found only 2 diagrams both dewalt.
I had this problem and just prised the setting band apart slightly with a screwdriver and sprayed it with WD40, this fixed the problem straight away and is now as good as new. I have the 18v version of this drill and use and abuse it regularly in all kinds of dusty enviroments and has been going strong for about 3yrs since i bought it new. Best cordless drill i've ever owned!
Kev.
July 2012
Similar thing happened to my DeWalt, except it wouldn't go into hammer mode. I cleaned it up with a cotton bud and it worked fine.
You could try contacting the manufacturer for technical data but personally I would give up and chuck it in the bin.
Adam
January 2010
Automatic Answer
While you wait for answers, we may have found some information which could help you.
howtomendit.com for free repair help, information and advice.
Try fixfault.com to fix drills.