To Husaqvarna Man?

It will certainly tell you if the induction tube is leaking, however it depends on how the impulse is done on this saw, to do a pressure test you need to blank off the exhaust and inlet port, then put a pressure/vacume in through the spark plug hole, if the impulse is through a hole in the induction block this will have been blocked off, if the impulse is a pipe direct to the carb then you would see if the pressure is coming through it, sorry to be vague but i am not too conversent on this brand of machine, all chainsaws work on the same principles.A simple pulse test is too put some oil in the pulse tube/block and crank the engine slowly, you should see the oil moving back and forth.

Husqvarna man
December 2009