Recent: Safely remove screen protector from a Macbook Air?

Mend > Oil Filled Radiators

Mend Calortec CR1000 Heat Setting Stays

calortec ceramic radiator 1000w?

What heat setting should I put the calortec on, so as
when it is switched off after 6 hours,the room stays warm for 24 hours.
Many Thanks Ann.

Ann Boden
December 2009
Thank You Peccavi,
and Merry Christmas.
Ann.

Ann Boden
December 2009
Only you can say...

Try it on max and see what happens
Then turn it down a notch each day
Until it's no longer warm enough for you
Then crank it up a notch
And make allowances for the outside temperature - if you know it's going to be very cold outside turn it up a bit.
In the Summer you may even to be able to turn it off completely

You are the World Expert on the combination of your room and your heater and how warm you like it to be.

Peccavi
December 2009

Automatic Answer

We may have found other answers which could help you.

Click here for Heat Setting Stays

Related Questions ...

Mend halogen electric cooker
1

Halogen ring stays on full heat?

The halogen ring on my Elba excellence cooker stays on full heat, whatever the setting _ heats fine but a pai... [Read more]
Mend tumble dryer heater element condenser
1

Beko DRCS68W not entering reset mode?

Hello everyone, I am having issues with my Beko DRCS68W condenser tumble dryer. It started when the drum got s... [Read more]
Mend heating working fine
2

triton amber III elecctrical shower not heating water?

I have a triton amber III electrical shower. All was working fine. The shower is on the 2nd level of my studio... [Read more]
Mend boiler overheating temperature
2

Vaillant VCW242E Overheating and Uncontrollable?

I have a Vaillant VCW242 E Combi Boiler. Following a freeze up of the Boiler, I can no longer control the t... [Read more]
Mend gas cooker flame ignition
1

oven wont fire up from low setting?

after lighting the oven it wont fire upto full flame stays on lowest heat even if on highest setting eg no 9,
Mend dishwasher repair fault
1

Proline pdw080 stuck timer & no heat?

Hi folks I’m experiencing a couple of problems with my Proline PDW080s Dishwasher. The first fault to ... [Read more]
Mend boiler radiator home heating
1

potterto 24?

I have same problem . turn on hot water tap and when you turn off burner light stays on and rads heat up ?? sw... [Read more]
Mend model water setting
1

Cookworks - model: E8528P-F will not heat up. ?

Mug of water at 100% setting for 2mins 30 secs stays totally cold. Light and turn-table work correctly and nor... [Read more]
Mend oven heating grill
1

Oven not heating up?

The grill and Turbo grill work ok. The fan works ok but the oven does not heat up. It stays on the lowest heat... [Read more]
Mend cannon flame stays
1

cannon chester 10454g (2001)?

I believe my flame failiure device is faulty as the flame lights and stays in low fire mode irrespective of th... [Read more]
Mend worm pilot light off
2

Glow Worm Compact 80 P - pilot light trips off?

Initially, relay constantly clicking in and out, boiler flaming up and down; then pilot tripped out and once r... [Read more]
Mend full heat stays setting
2

how can i fix my canon stratford cookers oven?

My oven will not go on to full heat it stays at the minimal setting regardless of where you have the knob. It ... [Read more]
Mend boiler heating temperature
1

ravenheat 24t ls 80t white star?

boiler is a 15 months old the water started going very hot then cold the3n hot then cold at fairly low tempera... [Read more]
Mend boiler central heating gas flame
4

My CH boiler keeps blowing out when its windy outside!?

Hi, I hope someone can help me with this one. I have an old Baxi Wm 381 RS CH boiler in a house we just moved ... [Read more]
Mend heat coming element
1

how do I fix my dryer?

First of all I do not have any heat coming out and when I put the dryer on a certain setting it stays there an... [Read more]

How to mend ...

Find out how to mend just about anything howtomendit.com for free repair help, information and advice.
Mend Oil Filled Radiators ...