Recent: Home max fs506x?

Mend > Switches and Sockets

Mend Switch Three Connection

how do i wire 3 gang ip55 waterproof switch?

i have a 3 gang switch. inside it has three connection for each switch. the connections are numbered 1, 2 and 3.
i have the input in live, neutral and earth.
my outputs are one in live, neutral and earth and two sets of live and neutral wires for xmas tree type lighting.

how should i wire the switch to have three lighting sets working individually through the 3gang switch

jimmy
December 2009
If Terminal 1 on the switches is the common terminal and if you have joined the return for each set of lights to the common neutral then it sounds as if it will work correctly - meeting the safety requirements is another matter and I'm not qualified to offer advice.

Connection to a lighting circuit - correct insulation - correct fusing and RCD protection are all important.

Good luck... Take care...

Peccavi
December 2009
i am using a waterproof switch since the switch will be fixed inside the gazebo.

i have connected the live into connection 1; then used small connection to link to the other two switches. this means that i have incoming live on all three switches.

i made a connection forneutral and earth outside the switch connections.

then i used connection three to bring in the switched live in the three switches.

of course while i was working i switched off the connection from the consumer unit.

should this work or not?

jimmy
December 2009
If it were me I'd do it on a 13A multiple socket with an appropriate 1A or 3A fuse in each plug - pull the plug to switch the lights off... and have it running through an RCD for safety. What you propose all sounds very scary especially if the lights are outdoors.

* * *

A light switch has Live going into it and Switched Live coming out - to turn the lights on and off.

Switches with three terminal connections are Single Pole and control only one conductor - Live. i.e. they do not have Neutral connected to them.

One of the 1,2,3 connections on each switch will be a Common connection and the switch will connect that terminal to each of the other two in turn as it's operated.

You will need to arrange for a common neutral connection (not connected to any of the switches) and you will need to determine which of the 1,2,3 terminals is the common connection for each switch.

An electrician may be safer - remember Lord Finchley...

Lord Finchley tried to mend the Electric Light
Himself. It struck him dead: And serve him right!
It is the business of the wealthy man
To give employment to the artisian.

Good luck...Take care...

Peccavi
December 2009

Related Questions ...

Mend motor three changed
1

mower electric motor?

Hi have three mower electric motors 1kW. from 3 off mowers. First mower failure to start changed the Capacitor... [Read more]
Mend boiler overheating temperature
2

Vaillant VCW242E Overheating and Uncontrollable?

I have a Vaillant VCW242 E Combi Boiler. Following a freeze up of the Boiler, I can no longer control the t... [Read more]
Mend engine restarts help
3

diesel engine suddenly stops. always instantly restarts?

Can anyone help? My diesel car motor stops unexpectedly. Mechanics don't know why. My diesel engine power... [Read more]
Mend switch standard three
4

Pull cord switch wiring instructions?

A standard cord pull switch is being put in a shed. There is three connections in the unit, - L1, L2, and CO... [Read more]
Mend fan heat suddenly
5

Fan for ventilation on Rover 416?

A strange one this as the fan for the ventilation and heat has suddenly stopped working on position 1. Its s... [Read more]
Mend heater switched fuses
1

why is my C class 220 D mercedes heater hot when switched off?

why is the heater on my mercedes 220 D hot when switched off? No fuses are blown, there is a 12 volt supply t... [Read more]
Mend connection three desktop
1

How to share internet connection?

I have three desktop pcs. One of it connects to the internet via a ADSL modem which uses a LAN connection to t... [Read more]
Mend switch faulty washing
1

How to check if door switch is faulty on Hotpoint Aquarius 1100?

The door switch on our Hotpoint Aquarius 1100 washing machine has been a bit difficult to operate for some tim... [Read more]

How to mend ...

Find out how to mend just about anything howtomendit.com for free repair help, information and advice.
Mend Switches and Sockets ...