Zanussi Electrolux ZDC535OW tumble dryer side panel removal/float switch?
After advise from CK need to remove side panels to locate the float switch, but after removing screws panels wont come off. Is brute force required? I dont want to damage the panels. Any suggestions appreciated. Thanks
lid off.remove screws down back on the side you are removing.On the top edge at the front is 1 screw to remove.pull top of side panel towards the back and a hook will pull out of the whole in the front cabinet.now lift away from casing.fit if reverse.no brute force required as such otherwise you will bend it
ck
November 2009
Automatic Answer
While you wait for answers, we may have found some information which could help you.
howtomendit.com for free repair help, information and advice.
Try fixfault.com to fix tumble dryers.