Eco button turns itself on - Worcester 25Si?

The answer was provided by a gentleman at Worcester.
The ECO mode switching itself back on is caused by the hot water being on 'timer'.

GrahamRounce
December 2020

I have this problem too. I turn Eco off, and after a while it comes on again.
Did the Worcester tech line help?

Graham Rounce
September 2020

I'm afraid I can't answer your query, but I have the opposite problem with my Worcester boiler. I don't normally want to use the Eco setting, but if I go away for a few days I want to set it, so as not to waste gas while I'm not there. However, when I come home I find that the setting has turned itself off.

I do know that the boiler cycles through all its controls once every 24 hours - this means that late every evening the Eco setting comes on for a short time then goes off again. The engineer has told me that this cannot be changed. I therefore assumed that if I had manually switched that setting on, every 24 hours it would go off for a short time then come back on again. But apparently not. Its default setting is always off, whatever I do. Maybe if someone knows what is going on, it may help AlanF as well as me!

Thanks.

hortense031187
June 2010

interesting problem i'll give worcester tec line a call tomorrow and try to get back to you

tim
October 2009

Sorry, my terminology was at fault. When I said "heating", I meant heating up the hot water supply. Not the central heating recirc.

It is very strange, nonetheless. The manual indicates that you switch it on, or off, and it is supposed to stay that way.

AlanF
October 2009

Unusual sounding problem,when u use the eco button it should just cycle the boiler internally not through the heating. Maybe you have a diverter issue,as for the button itself may well be a pcb job D'oh

tim
October 2009